Code：407
- Use：
●Minimum labeling temp:-5℃.
Service temp: -20℃~70℃(24h after labeling)
●Suitable for logistics tag.
●Suitable for fine bar code printing.
●Application environment above 50℃ or direct sunlight are not applicable.
- Mob：13602392761
-
Detail
Contact
Application
●Minimum labeling temp:-5℃.
Service temp: -20℃~70℃(24h after labeling)
●Suitable for logistics label.
●Suitable for supermarket label.
●Suitable for industrial high speed printing,reduce the abrasion of printer-probe.
●Application environment above 50℃ or direct sunlight are not applicable.
Print & Process
●Suitable for conventional printing.
●Alcohol or volatile organic solvent inks are not applicable.
Shelf life
From date of manufacture:9 months,storage conditions: 23±2℃ & relative humidity 50±5%.According to the thermal paper properties,please try to avoid keeping the product in high temperature, high humidity, alcohol, oil, plasticizer.
| Facestock | |||
| Topcoated thermal paper,have good performance at resistance of water,oil,plasticizer and scratch. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 70±5% | g/㎡ | ISO536 |
| Caliper | 72±5% | μm | ISO534 |
| Water Proof | ≥50 | % | GB/T28210 |
| Oil Proof | ≥80 | % | GB/T28210 |
| Plasticizer proof | ≥80 | % | 40℃，24h |
| Optical | ≥1.10 | GB/T 28210 | |
| Adhesive | |||
|
General purpose permanent hot melt adhesive |
|||
| Liner | |||
| Super calendered blue glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 60±5% | g/㎡ | ISO536 |
| Caliper | 53±5% | μm | ISO534 |
| Tear Resistance | ≥300 | mN | ISO 1924-2 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥14 or PT | N/25mm | FTM9，ss |
| 90° Peel Adhesion (20min) | ≥7 or PT | N/25mm | FTM2, ss |
| Permanent adhesion | ≥10 | H | FTM8，ss |
| Release force | 10~40 | G/25mm | FTM4，ss |
statement:
● All descriptions, technical information and application recommendations for the materials are based on test results that we believe to be reliable, but do not constitute a guarantee. All products sold should be tested by the customer in the final use environment to confirm compliance with the requirements of the environment and determine which materials to purchase.
● Our company is responsible for retaining the final interpretation.