Code:S571
- Use:
●Minimum labeling temp:-5℃.
Service temp :-20℃~100℃.(24h after labeling)
●Suitable for daily chemical products label, personal hygiene products label and promotional label.
●Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
●Not recommended for occasions with duplicate paste requirement.
- Mob:13612780445
Detail
Contact
Application
●Minimum labeling temp:-5℃.
Service temp :-20℃~100℃.(24h after labeling)
●Suitable for daily chemical products label, personal hygiene products label and promotional label.
●Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
●Not recommended for occasions with duplicate paste requirement.
Print & Process
●With special treatment coating, can be used in relief printing, flexography printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink and water-based ink
●Control the viscosity of print ink, high contractility bring label crimp,cause the label detach from release paper or warp from label object.
●Excellent performance at bronzing.
●Sharp special die-cut knife for film is recommended especially platen die cut.
Shelf life
From date of manufacture:12 months,storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
Facestock | |||
A kind of high metal gloss BOPP film with special printability coating | |||
Indicator | Parameter | Unit | Method |
Substance | 45±5% | g/㎡ | ISO 536 |
Caliper | 50±5% | μm | ISO 534 |
Adhesive | |||
General purpose membrane emulsion acrylic adhesive | |||
Liner | |||
Super calendered thick white glassine | |||
Indicator | Parameter | Unit | Method |
Substance | 80±5% | g/㎡ | ISO 536 |
Caliper | 70±5% | μm | ISO 534 |
Tensile strength MD | ≥6 | kN/m | ISO 1924-2 |
Performance data | |||
Indicator | Parameter | Unit | Method |
Initial Tack | ≥8 | N/25mm | FTM9,ss |
90 ° Peel Adhesion(20min) | ≥5 | N/25mm | FTM2, ss |
Release force | 10~40 | G/25mm | FTM4,ss |
Shear Min | ≥15 | hours | FTM8,ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.