Code：HPC575
- Use：● Fulfill the requirement of ROHS, REACH, VOC● Suitable for daily chemical, personal care, medicine and other fields；such as bottle label, sealing label etc.
● Suitable for "no-label look" transparent label.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH, VOC
● Minimum labeling temp: -5℃
● Service temp: -20℃~80℃ (24h after labeling)
● Suitable for daily chemical, personal care, medicine and other fields；such as bottle label, sealing label etc.
● Due to the stiffer facestock, this material is not recommended for bottles with diameter less than 20mm or labeling to irregular curved surfaces or very soft bottle.
● Not recommended for applications with repeated stick requirements.
● Suitable for "no-label look" transparent label.
● If need to be applied to wet surface, it must be tested to ensure that it is resistant to being soaked.
Print & Process
● With special treatment coated, can be used in multiple printing methods such as letterpress, flexo, gravure, and screen printing etc. UV ink & water-based ink is suitable
● Control the viscosity of print ink, high-contractility bring label crimp, causing the label detach from release paper or warp from label object.
● Film special die-cutting knife is recommended, especially the flat die-cutting.
Shelf life
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| A kind of transparent bi-axially stretch pp film with coated, have good performance in waterproof, oil resistance, and chemical resistance. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 45±5% | g/㎡ | ISO 536 |
| Caliper | 50±5% | μm | ISO 534 |
| Haze | ≤3 | % | ASTM D1003 |
| Adhesive | |||
| General purpose membrane emulsion acrylic adhesive | |||
| This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products. | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥8 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | ≥5 | N/25mm | FTM2, ss |
| Shear Strength | ≥15 | hours | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.