Code：HPC576
- Use：● Fulfill the requirement of ROHS, REACH, VOC● Suitable for application of daily chemical, personal care and washing products, etc.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH, VOC
● Minimum labeling temp: -5℃
● Service temp: -20℃~80℃ (24h after labeling)
● Suitable for daily chemical, personal care, medicine and other fields, such as bottle labels, sealing labels, etc.
● Not recommended for small bottle with diameter smaller than 20mm, and not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
● Not recommended for occasions with duplicate paste requirement.
● Suitable for "no-label sense" labels.
● If need to be applied to wet surface, it must be tested toensure that it is resistant to being soaked.
Print & Process
● With special treatment coating, can be used in relief printing, flexography printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink and water-based ink.
● Control the viscosity of print ink. High contractility brings label crimp, causing the label detach from release paper or warp from label object.
● It is recommended to use a sharp film-specific die-cutting knife, especially for flat pressing die-cutting.
Shelf life
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| A kind of coated, transparent biaxially oriented BOPP film. Excellent resistance to water, oil and chemicals. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 45±5% | g/㎡ | ISO 536 |
| Caliper | 50±5% | μm | ISO 534 |
| Haze | ≤3 | % | ASTM D1003 |
| Adhesive | |||
| General purpose film acrylic adhesive | |||
|
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
|
|||
| Liner | |||
| Transparent PET | |||
| Indicator | Parameter | Unit | Method |
| Caliper | 30±5% | μm | ISO 534 |
| Haze | ≤2.7 | % | GB2410-80 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥8 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | ≥5 | N/25mm | FTM2, ss |
| Shear Strength | ≥15 | hours | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.