Code：HPS671
- Use：● Fulfill the requirement of ROHS, REACH● Suitable for daily chemical products label, personal hygiene products label and promotional label.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH
● Minimum labeling temp: -5℃
● Service temp: -20℃~70℃ (24h after labeling)
● Suitable for daily chemical products label, personal hygiene products label and promotional label.
● Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is relatively stiff.
● There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.
Print & Process
● With special treatment coating, can be used in relief printing, flexography printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink and water-based ink.
● Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
● Excellent performance at bronzing.
Shelf life
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| A kind of high metal gloss BOPP film with special printability coating. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 45±5% | g/㎡ | ISO 536 |
| Caliper | 50±5% | μm | ISO 534 |
| Adhesive | |||
| General purpose permanent hot melt adhesive | |||
| This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products. | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥11 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | ≥5 | N/25mm | FTM2, ss |
| Shear Strength | ≥15 | hours | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.