Code：HPW831
- Use：● Fulfill the requirement of ROHS, REACH, VOC● Suitable for daily chemical products label, personal hygiene products label and transit label, etc.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH, VOC
● Minimum labeling temp: +5℃
● Service temp: -20℃~80℃ (24h after labeling)
● Suitable for daily chemical products label, personal hygiene products label and transit label, etc.
● Rough surface substrate is not recommended.
● Due to the differences of labeling substrate and the application environment, after labeling (usually 3 months), the adhesive viscosity may increase and there is a possibility of transitioning to permanent adhesive; or the adhesive viscosity may decrease. Some substrates may have strong chemical reaction with removable adhesive, so full testing is recommended before use.
Print & Process
● Suitable for conventional printing.
● Control the viscosity of ink. High contractility of ink bring label crimp, causing the label detach from release paper or warp from label object.
● In order to keep good removable performance of the label, it is not recommended to apply it in an environment over 70°C and not recommended to apply it on the surface of polymethyl methacrylate (PMMA), PVC, PET and PP, etc. Due to greater differences of paper substrates, prior testing is recommended.
Shelf life
| Facestock | |||
| This is a fine pearlized film with special printability coated. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 45±5% | g/㎡ | ISO 536 |
| Caliper | 60±5% | μm | ISO 534 |
| Glossiness | ≥85 | % | ASTM D2457(60°) |
| Adhesive | |||
| Removable acrylic adhesive | |||
| This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products. | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | 3-7 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | 1-3.5 | N/25mm | FTM2, ss |
| Shear Strength | ≥1 | hour | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.