Code：200
- Use：
● Minimum labeling temperature: 10 ° C
●Applicable ambient temperature after labeling for 24h: -15°C~90°C
● Suitable for food and medical labels with regular gloss
● If it is used for small bottle labeling with diameter less than 30mm, it needs to be tested and confirmed.
- Mob：13612780445
-
Detail
Contact
application
● Minimum labeling temperature: 10 ° C
●Applicable ambient temperature after labeling for 24h: -15°C~90°C
● Suitable for food and medical labels with regular gloss
● If it is used for small bottle labeling with diameter less than 30mm, it needs to be tested and confirmed.
● Rough surface substrate is not recommended
Printing and processing
● Suitable for regular printing
● Full printing is not recommended
Storage period and conditions
It can be stored for one year at a temperature of 23 ± 2 ° C and a relative humidity of 50 ± 5%.
| Face material | |||
| A matte paper with a matte finish and matte finish | |||
| index | parameter | unit | method |
| Gram | 80±5% | g/m2 | GB/T 451.2 |
| thickness | 70±5% | Mm | GB/T 451.3 |
| Adhesive | |||
| Universal permanent rubber-based hot melt adhesive | |||
| Substrate | |||
| Supercalendered white glassine | |||
| index | parameter | unit | method |
| Gram | 60±5% | g | GB/T 451.2 |
| thickness | 53±5% | Mm | GB/T 451.3 |
| Tear degree | ≥300 | mN | GB/T 455 |
| Mechanical properties | |||
| index | parameter | unit | method |
| Initial adhesion | ≥17 or tear | N | FTM9, ss |
| 90° peel force (20min) | ≥9 or tear | N/25mm | FTM2, ss |
statement:
● All descriptions, technical information and application recommendations for the materials are based on test results that we believe to be reliable, but do not constitute a guarantee. All products sold should be tested by the customer in the final use environment to confirm compliance with the requirements of the environment and determine which materials to purchase.
Our company is responsible for retaining the final interpretation.