Code：002
- Use：
● Minimum labeling temperature: 10 ° C
●Applicable ambient temperature after labeling for 24h: -20°C~100°C
● Bar code printing and blank die-cut label for regular gloss
● If it is used for small bottle labeling with diameter less than 30mm, it needs to be tested and confirmed.
- Mob：13612780445
-
Detail
Contact
application
● Minimum labeling temperature: 10 ° C
●Applicable ambient temperature after labeling for 24h: -20°C~100°C
● Bar code printing and blank die-cut label for regular gloss
● If it is used for small bottle labeling with diameter less than 30mm, it needs to be tested and confirmed.
● Rough surface substrate is not recommended
Printing and processing
● Suitable for regular printing
● Full printing is not recommended
Storage period and conditions
It can be stored for one year at a temperature of 23 ± 2 ° C and a relative humidity of 50 ± 5%.
| Face material | |||
| A matte paper with a matte finish and matte finish | |||
| index | parameter | unit | method |
| Gram | 80±5% | g/m2 | GB/T 451.2 |
| thickness | 70±5% | Mm | GB/T 451.3 |
| Adhesive | |||
| High viscosity permanent acrylic emulsion | |||
| Substrate | |||
| Supercalendered white glassine | |||
| index | parameter | unit | method |
| Gram | 60±5% | g | GB/T 451.2 |
| thickness | 53±5% | Mm | GB/T 451.3 |
| Tear degree | ≥300 | mN | GB/T 455 |
| Mechanical properties | |||
| index | parameter | unit | method |
| Initial adhesion | ≥14 or tear | N | FTM9, ss |
| 90° peel force (20min) | ≥7 or tear | N/25mm | FTM2, ss |
statement:
● All descriptions, technical information and application recommendations for the materials are based on test results that we believe to be reliable, but do not constitute a guarantee. All products sold should be tested by the customer in the final use environment to confirm compliance with the requirements of the environment and determine which materials to purchase.
●Our company is responsible for retaining the final interpretation.