Code：003
- Use：●Minimum labeling temp：0℃
Service temp ：-20℃~100℃.(24h after labeling)
●Suitable for bar code printing,blank die-cutting label in conventional glossy.
●Must test to confirm if used in small bottle label (diameter smaller than 30mm).
●Rough surface substrate is not recommended.
- Mob：13612780445
-
Detail
Contact
Application
● Minimum labeling temp：0℃
Service temp ：-20℃~100℃.(24h after labeling)● Suitable for bar code printing,blank die-cutting label in conventional glossy.
● Must test to confirm if used in small bottle label (diameter smaller than 30mm).
● Rough surface substrate is not recommended.
Print & Process
● Suitable for conventional printing.
● Full page printing is not recommend.
Shelf life
From date of manufacture:12 months,storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| Art paper ,glossiness between matte & high gloss. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 80±5% | g/㎡ | ISO 536 |
| Caliper | 70±5% | μm | ISO 534 |
| Adhesive | |||
| High-viscosity permanent emulsion acrylic adhesive | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 60±5% | g/㎡ | ISO 536 |
| Caliper | 53±5% | μm | ISO 534 |
| Tear resistance | ≥300 | mN | ISO 1924-2 |
| Performance Data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥14 or PT | N/25mm | FTM9，ss |
| 90° Peel Adhesion (20min) | ≥7 or PT | N/25mm | FTM2, ss |
| Release force | 10~40 | G/25mm | FTM4，ss |
| Permanent adhesion | ≥3 | H | FTM8，ss |
statement:
● All descriptions, technical information and application recommendations for the materials are based on test results that we believe to be reliable, but do not constitute a guarantee. All products sold should be tested by the customer in the final use environment to confirm compliance with the requirements of the environment and determine which materials to purchase.
● Our company is responsible for retaining the final interpretation.