Code：S10
- Use：
●Minimum labeling temp：0℃.
Service temp ：-20℃~100℃.(24h after labeling).
●Suitable for Food or Medicine label in conventional gloss.
●Must test to confirm if used in small bottle label (diameter smaller than 30mm).
●Rough surface substrate is not recommended.
- Mob：13612780445
-
Detail
Contact
Applicatio
●Minimum labeling temp：0℃.
Service temp ：-20℃~100℃.(24h after labeling).
●Suitable for Food or Medicine label in conventional gloss.
●Must test to confirm if used in small bottle label (diameter smaller than 30mm).
●Rough surface substrate is not recommended.
Print & Process
●Suitable for conventional printing.
●Control the viscosity of print ink,to avoid heavy viscosity cause coating exfoliation.
Shelf life
From date of manufacture:12 months,storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| Coated paper ,glossiness between matte & high gloss. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 70±5% | g/㎡ | ISO536 |
| Caliper | 61±5% | μm | ISO534 |
| Adhesive | |||
| High-viscosity permanent emulsion acrylic adhesive | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 60±5% | g/㎡ | ISO536 |
| Caliper | 53±5% | μm | ISO534 |
| Tear Resistance | ≥300 | mN | ISO 1924-2 |
| Performance Data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥14 or PT | N/25mm | FTM9，ss |
| 90°Peel Adhesion（20min） | ≥7 or PT | N/25mm | FTM2，ss |
| Release force | 10~40 | G/25mm | FTM4，ss |
| Shear Min | ≥3 | hours | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of finally explanation.