Code：S881
- Use：
●Minimum labeling temp：-15℃.
Service temp ：-30℃~65℃.(24h after labeling)
●Suitable for daily chemical products label and the refrigeration field.
●Facestock is stiffer. Small caliber,irregular surface or extruded bottle is not recommended.
●It has good initial adhesion and final adhesion at low temperature, and has excellent performance on many packaging materials. Not suitable for use on PVC surfaces.
- Mob：13612780445
-
Detail
Contact
Application
●Minimum labeling temp：-15℃.
Service temp ：-30℃~65℃.(24h after labeling)
●Suitable for daily chemical products label and the refrigeration field.
●Facestock is stiffer. Small caliber,irregular surface or extruded bottle is not recommended.
●It has good initial adhesion and final adhesion at low temperature, and has excellent performance on many packaging materials. Not suitable for use on PVC surfaces.
Print & Process
●With excellent printing performance and bar code printing performance, and good stiffness, easy to mark.
●Suitable for conventional printing. Should avoid printing to the edge of the label, high shrinkage ink layer will make the label crimped, resulting in the release of the paper or warped on the paste.
●Ink testing is recommended before printing.
Shelf life
From date of manufacture:12 months,storage conditions: 23±2℃ & relative humidity 50±5%.Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| Fine synthetic paper both have paper printability and BOPP film physical characteristics | |||
| Indicator | Parameter | Unit | Method |
| Caliper | 75±5% | μm | ISO536 |
| Whiteness | ≥90 | % | TAPPI T-525 |
| Opacity | ≥80 | % | TAPPI T-425 |
| Adhesive | |||
| Freezing hot melt adhesive | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 60±5% | g/㎡ | ISO536 |
| Caliper | 53±5% | μm | ISO534 |
| Tear Resistance | ≥300 | mN | ISO 1924-2 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥15or PT | N/25mm | FTM9, ss |
| 90° peel Adhesion(20min) | ≥7or PT | N/25mm | FTM2, ss |
| Shear Min | ≥10 | hours | FTM8，ss |
| Release force | 10~40 | G/25mm | FTM4，ss |
statement:
●All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty.All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
●We reserve the rights of final explanation.