Code：HS602
- Use：● Fulfill the requirement of ROHS, REACH● Suitable for daily chemical products label in conventional gloss.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH
● Minimum labeling temp: -5℃.
● Service temp : -20℃~70℃.(24h after labeling)
● Suitable for daily chemical products label in conventional gloss.
● Facestock is stiffer. Small caliber, irregular surface or extruded bottle is not recommended.
● There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.
Print & Process
● Excellent performance in printing and bar code print, good stiffness, easy to peel off. Suitable for conventional printing. Avoid to print to the edge of label, the high-contractility bring label crimp, cause the label detach from release paper or warp from label object. Ink test before printing is recommended.
● Full page printing is not recommended.
Shelf life
| Facestock | |||
| Fine synthetic paper both have paper printability and BOPP film physical characteristics. | |||
| Indicator | Parameter | Unit | Method |
| Caliper | 75±5% | μm | ISO 534 |
| Opacity | ≥80 | % | TAPPI T-425 |
| Whiteness | ≥92 | % | TAPPI T-525 |
| Adhesive | |||
| General purpose permanent hot melt adhesive | |||
| This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products. | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥14 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | ≥8 | N/25mm | FTM2, ss |
| Shear Min | ≥15 | hours | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.