Code：HS820
- Use：● Fulfill the requirement of ROHS, REACH, VOC● Suitable for daily chemical label, process transit label in conventional gloss, etc.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH, VOC
● Minimum labeling temp: +5℃
● Service temp: -20℃~80℃ (24h after labeling)
● Suitable for daily chemical label, process transit label in conventional gloss, etc.
● The facestock is relatively hard so not recommended for small diameter bottles, irregular surfaces or bottles that require squeezed frequently.
● Due to the differences of labeling substrate and the usage environment, after labeling (usually 3 months), the adhesive viscosity may increase and there is a possibility of transitioning to permanent adhesive; or the adhesive viscosity may decrease. Some substrates may react strongly with removable adhesives chemically, so full testing is recommended before use.
Print & Process
● Suitable for conventional printing.
● Full page printing is not recommended.
● In order to keep good removable performance of the label, it is not recommended to apply it in an environment over 70°C and to apply it on the surface of polymethyl methacrylate (PMMA), PVC, PET and PP, etc. For paper substrates, prior testing is recommended due to greater surface differences.
Shelf life
| Facestock | |||
| High quality synthetic paper with printability similar to paper and physical characteristics similar to BOPP film. | |||
| Indicator | Parameter | Unit | Method |
| Caliper | 75±5% | μm | ISO 534 |
| Opacity | ≥80 | % | TAPPI T-425 |
| Whiteness | ≥90 | % | TAPPI T-525 |
| Adhesive | |||
| Removable acrylic adhesive | |||
|
This adhesive complies with FDA section 21(175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
|
|||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | 2-7 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | 1-3.5 | N/25mm | FTM2, ss |
| Shear Strength | ≥1 | hour | FTM8，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.