Code：HS881
- Use：● Fulfill the requirement of ROHS, REACH● Suitable for daily chemical labels in conventional gloss, refrigeration and cold-chain fields, etc.
- Mob：13602392761
-
Detail
Contact
Application
● Fulfill the requirement of ROHS, REACH
● Minimum labeling temp: -25℃
● Service temp: -50℃~50℃ (24h after labeling)
● Suitable for daily chemical labels in conventional gloss, refrigeration and cold-chain fields, etc.
● Not recommended to be used in small diameter bottles, irregular curved surface and occasions with duplicate paste requirement because the facestock is stiffer.
● Good initial and final adhesion at low temperatures, with excellent performance on many packaging materials. Not suitable for application on PVC surfaces.
Print & Process
● Excellent printing and barcode printing performance with good stiffness and easy labeling. Suitable for conventional printing. Please avoid to print onto the edge of the label, as a high shrinkage ink layer can cause the label to curl, causing it to detach from the release liner or curl up on the attached object. Ink testing before printing is recommended.
● Full page printing is not recommended.
● Recommended to use a film-specific die-cutting knife for die-cutting.
● Not recommended to process and use in environment above 20 ℃
Shelf life
| Facestock | |||
| A kind of high-quality synthetic paper with both printability similar to paper and physical characteristics similar to BOPP film. | |||
| Indicator | Parameter | Unit | Method |
| Caliper | 54±5% | μm | ISO 534 |
| Whiteness | ≥80 | % | TAPPI T-525 |
| Opacity | ≥80 | % | TAPPI T-525 |
| Adhesive | |||
| Freezing hot melt adhesive | |||
|
This adhesive complies with FDA section 21(175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
|
|||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 58±5% | g/㎡ | ISO 536 |
| Caliper | 51±5% | μm | ISO 534 |
| Tear Resistance | ≥300 | mN | GB/T 455 |
| Performance data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥11 | N | FTM9，ss |
| 90 ° Peel Adhesion（20min） | ≥6 | N/25mm | FTM2, ss |
| Shear Strength | ≥8 | hours | FTM8，ss |
| Low-temperature Loop Tack | ≥15 | N | ±5℃，ss |
statement:
● All the statements,tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes.
● We reserve the rights of final explanation.