Code：204
- Use：
●Minimum labeling temp：-5℃.
Service temp ：-20℃~90℃.(24h after labeling).
●Suitable for bar code printing,blank die-cutting label in conventional gloss.
●Must test to confirm if used in small bottle label (diameter smaller than 30mm).
- Mob：13612780445
-
Detail
Contact
Applicatio
●Minimum labeling temp：-5℃.
Service temp ：-20℃~90℃.(24h after labeling).
●Suitable for bar code printing,blank die-cutting label in conventional gloss.
●Must test to confirm if used in small bottle label (diameter smaller than 30mm).
Print & Process
●Suitable for conventional printing.
●Full page printing is not recommend.
Shelf life
From date of manufacture:12 months,storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Facestock | |||
| Art paper ,glossiness between matte & high gloss. | |||
| Indicator | Parameter | Unit | Method |
| Substance | 80±5% | g/㎡ | ISO536 |
| Caliper | 70±5% | μm | ISO534 |
| Adhesive | |||
| General purpose permanent hot melt adhesive | |||
| Liner | |||
| Super calendered white glassine | |||
| Indicator | Parameter | Unit | Method |
| Substance | 60±5% | g/㎡ | ISO536 |
| Caliper | 53±5% | μm | ISO534 |
| Tear Resistance | ≥300 | mN | ISO 1924-2 |
| Performance Data | |||
| Indicator | Parameter | Unit | Method |
| Initial Tack | ≥17 or PT | N/25mm | FTM9，ss |
| 90°Peel Adhesion（20min） | ≥9 or PT | N/25mm | FTM2，ss |
| Release force | 10~40 | G/25mm | FTM4，ss |
| Permanent adhesion | ≥10 | H | FTM8，ss |
statement:
● All descriptions, technical information and application recommendations for the materials are based on test results that we believe to be reliable, but do not constitute a guarantee. All products sold should be tested by the customer in the final use environment to confirm compliance with the requirements of the environment and determine which materials to purchase.
● Our company is responsible for retaining the final interpretation.